Item Description
Pressing tools, jaws and chain sets are an integral part of ensuring a reliable, permanent connection between copper piping and NIBCO Press System® fittings and valves. Use only pressing tools, jaws and chain sets that have been tested and approved for use with NIBCO Press System® fittings and valves. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. NIBCO Press System® applies the proven performance of press technology to NIBCO valves and fittings – the most specified flow control products in the industry. The NIBCO Press System® features a full range of precision engineered copper and copper alloy fittings, commercial valves, accessories, pressing tools, jaws and chains.
Item ID: 70HXZKE
Width:
Height:
Extra Data: Creates leak-free connections, No flame, solder or flux, Use with PC-20M or PC-10M press tools
AltImageName1: /NBC/MINIJAW.jpg
AltImageName2: /NBC/MINIJAW.jpg
AltImagePath1: /NBC-MINIJAW.JPEG
AltImagePath2: /NBC-MINIJAW.JPEG
Country: Germany
Description: The NIBCO Press System 3/4-inch mini pressing jaw is intended for use with the PC-20M press tool or the PC-10M press tool. The pressing jaw is installed in the appropriate pressing tool. When the trigger on the pressing tool is depressed a crimp is made, a
Disclaimer: NIBCO Press System pecent is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCVH8
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSSâ„¢ U
Country: China
Description: The NIBCO FLO-BOSS Coil-Connect Brass Union is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and components from the system. Each union is equipped with 1 PT por
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® FLO-BOSS® Union is constructed of dezincincification resistant brass and is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and/or components from the system. Union options allow for flexibility with a variety of combinations of Solder, FPT, MPT and Press end connections. Union tailpiece options give further flexibility by adding up to 2 reductions in connection size. Each union comes standard with a PT port and has 2 additional tapped and plugged ports for the additon of optional accessories. NIBCO® FLO-BOSS® Coil-Connect® components are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PXC
Width:
Height:
Extra Data: 600 psi non-shock cold working pressure at 100°F, DZR Brass body and end connector, EPDM O-ring, Maximum temperature rating 250°F at 200 psi
Bullet5: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet6: FLO-BOSSâ„¢ U
Bullet7: Solder ends per ASME B16.22
Country: China
Description: The NIBCO FLO-BOSS Coil-Connect Brass Union is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and components from the system. Each union is equipped with 1 PT por
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
Webstone offers a wide array of mixing valves and accessories for a host of applications and system requirements. This particular series of valves is suitable for point-of-use or point-of-source applications. Designed for use with water, oil, glycol mix in residential or commercial plumbing and heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Item ID: 7079V81
Width:
Height:
Extra Data: Heavy Duty Forged Brass Construction, Integral Check Valve on Inlet, Mixes Hot and Cold Water to Pre-Set Output Temperature, Temperature Locking Handle on Select Models
Bullet10: Certified to NSF/ANSI/CAN 61 & 372
Bullet11: ASSE 1017, 1070, 1061
Bullet5: Compatible With G1 Fittings
Bullet6: Replacement Checks Also Available
Bullet7: Models available to satisfy all state and federal low-lead laws
Bullet8: Available in PEX, MIP, SWT, PRS, PSH, FIP, GMT
Bullet9: CSA B125.3
Country: Italy
Description: Thermostatic Mixing Valve w/ Integral Check Valves, Forged Brass Valve w/ DZR Brass Fittings, Temperature Locking Handle, and G1 Union Connections, For Low Temp Hydronic Heat and Water Distribution Systems, Outlet Temperature Range 95- 131F
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.