Item Description
The PVC DWV double sanitary tee features all hub connections, a flowing sweep to aid in the evacuation of waste and used fluids, and a 90-degree side inlet to join a PVC branch line into a vertical drain pipe. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 707DWWV
Width:
Height:
Finish: White
Extra Data: ASTM D2665 and D3311, Do not test or use with compressed air or other gases, Maximum service temperature 140°F, NSF/ANSI Standard 14
Bullet5: UL Listed 94V-0
Bullet6: NSF U.P. Certified
Country: US
Description: Double Sanitary Tee with 90 degrees Inlet Hub - PVC DWV
Item Description
The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The Buna-N cartridge seat liner with ductile iron, electro nickel plated disc has good abrasion resistance properties and compatibility with solvents, oil, water and hydraulic fluid for compressed air. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® international cast iron butterfly valves for versatile and economical applications in commercial systems. These valves are backed by the NIBCO 5-year125% limited warranty.
Item ID: 70HMYJA
Width:
Height:
Extra Data: Buna-N cartridge seat liner, Lug style, Maximum 180°F service, Valve pressure rating 200 psi
Bullet10: Designed to meet MSS SP-67
Bullet5: Nickel electroplated ductile iron disc
Bullet6: Stainless steel stem with bronze bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve is designed specifically to meet the rigorous requirements of automatic sprinkler systems. The EPDM encapsulated ductile iron disc provides bubble-tight shutoff at rated pressure. These valves are installed and monitored in fire protection applications where they remain in the normally closed position. A typical application would be fire pump test bypass lines. With the internal splined stem/disc drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and fire protection systems. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN1F9
Width:
Height:
Extra Data: Designed for normally closed position monitoring, EPDM encapsulated ductile iron disc, Grooved style, Valve pressure rating 300 psi wwp
AltImageName1: /NBC/GD4865C8N.jpg
AltImageName2: /NBC/GD4865C8N.jpg
AltImagePath1: /NBC-GD4865C8N.JPEG
AltImagePath2: /NBC-GD4865C8N.JPEG
Bullet10: UL Listed for Indoor and Outdoor Service
Bullet5: Stainless steel stem with metal bushings
Bullet6: Available with (suffix 8N) internal monitor switches
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and brass hard chrome plated ball exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features solder end connections for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8WQF
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Valve pressure rating 200 psi 13.8 bar for medical gas, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve is designed specifically to meet the rigorous requirements of automatic sprinkler systems. The unique EPDM molded-in seat liner with ductile iron disc provides bubble-tight shutoff at rated pressure. These valves are installed and monitored in fire protection applications where they remain in the normally closed position. A typical application would be fire pump test bypass lines. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and fire protection systems. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMXHR
Width:
Height:
Extra Data: Designed for normally closed position monitoring, EPDM molded-in seat liner, Valve pressure rating 250 psi wwp, Wafer style
AltImageName1: /NBC/WD3510-C-8.jpg
AltImageName2: /NBC/WD3510-C-8.jpg
AltImagePath1: /NBC-WD3510-C-8.JPEG
AltImagePath2: /NBC-WD3510-C-8.JPEG
Bullet10: Available with (suffix 8N) internal monitor switches
Bullet5: Ductile iron disc
Bullet6: Stainless steel stem with copper bushings
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The reducing coupling features solder cups. The fitting provides a means of connecting larger size tube to smaller size tube. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 706UJY5
Width:
Height:
Extra Data: ASTM B75 Alloy C12200, Dezincification resistant, Lead-free*, NSF/ANSI/CAN-61 and 372
Bullet5: Material and workmanship per ASME B16.22
Bullet6: Material, workmanship and dimensions per MSS SP-104
Bullet7: NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Bullet8: UL 207 Recognized to 700 PSI (select diameters)
Bullet9: Material, workmanship and dimensions per MSS SP-109 (5" to 8")
Item Description
The NIBCO® ductile iron butterfly control valve is designed specifically to meet the rigorous requirements of higher pressure automatic sprinkler systems. The EPDM seat disc provides bubble-tight shutoff at rated pressure. With the internal splined stem/disc drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and fire protection systems. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HN2DH
Width:
Height:
Extra Data: EPDM seat disc, Grooved style, Stainless steel stem with metal bushings, Valve pressure rating 350 psi wwp
AltImageName1: /NBC/GD48658N.jpg
AltImageName2: /NBC/GD48658N.jpg
AltImagePath1: /NBC-GD48658N.JPEG
AltImagePath2: /NBC-GD48658N.JPEG
Bullet10: UL Listed for Indoor and Outdoor Service
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. The two-piece valve features threaded ends for easy installation. The two-piece valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFU6C
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Single union end piece, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet7: Standard lever handle, optional NIB-SEAL®
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: US
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. The two-piece valve features threaded ends for easy installation. The two-piece valve is ideal for commercial and ligh
Height: 3.100
Length: 8.900
Made to Order: Yes
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The P-Trap features solder cups. The fitting provides a water seal, preventing unwanted gases to enter the dwelling. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. In addition to its inherent qualities of beauty, durability and low maintenance, copper''''s reusability makes it an ideal application in sustainable projects. NIBCO® copper fittings are manufactured in an ISO 9001 certified facility, and backed by a 50-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Item ID: 7076QL7
Width:
Height:
Extra Data: ASTM B584 Alloy C84400, Dezincification resistant, Material and workmanship per ASME B16.23
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HMWJW
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Valve pressure rating 250 psi, Wafer style
AltImageName1: /NBC/WD20003.jpg
AltImageName2: /NBC/WD20003.jpg
AltImagePath1: /NBC-WD20003.JPEG
AltImagePath2: /NBC-WD20003.JPEG
Bullet10: Not recommended for steam service
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUXF
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI and ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties and is recommended for many high pressure applications. The two-piece valve is recommended for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. Please refer to NIBCO technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFU6J
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Single union end, threaded body end x solder end connections, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet7: Standard lever handle, optional NIB-SEAL®
Bullet8: Dezincification resistant
Bullet9: Use in U.S. drinking water applications is prohibited after January 3, 2014
Country: US
Description: Two-Piece Bronze Ball Valve - Threaded x Solder, Single Union End
Disclaimer: End Connection: Threaded by solder Valve Style: Two-piece body, full port 600 psi Basic Material: Bronze Seat Material: Reinforced PTFE Trim Material: Brass hard chrome plated ball and silicon bronze stem NIB-SEAL pecent is a registered trademark of NIBC
Height: 3.100
Length: 8.900
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. The valve''''s unique molded-in flouroelastomer seat liner with CF8M stainless steel disc is recommended for most applications. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® ductile iron butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HK1Q0
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, FKM molded-in seat liner, Valve pressure rating 200 psi, Wafer style
Bullet10: Designed to meet MSS SP-67
Bullet5: CF8M stainless steel disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8MYP
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 353°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Rising stem, Solid wedge
Bullet5: Screw-in bonnet
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® ductile iron lug butterfly valve provides ease of operation with quarter-turn (90 degrees) open to close. With the internal stem/disc geometric drive design, there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. The unique molded-in EPDM seat liner with aluminum bronze disc is recommended for most water applications. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJUXP
Width:
Height:
Extra Data: 225°F continuous and 250°F intermittent service, EPDM molded-in seat liner, Lug style, Valve pressure rating 200 psi
AltImageName1: /NBC/LD20003.jpg
AltImageName2: /NBC/LD20003.jpg
AltImagePath1: /NBC-LD20003.JPEG
AltImagePath2: /NBC-LD20003.JPEG
Bullet10: Designed to meet MSS SP-67
Bullet5: Aluminum bronze disc
Bullet6: Stainless steel stem with copper bushings
Bullet7: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze globe valve is recommended for bi-directional service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8NYD
Width:
Height:
Extra Data: 125 psi/8.6 bar saturated steam to 366°F/178°C, 200 psi/13.8 bar non-shock cold working pressure, Integral seat, Screw-in bonnet
Bullet5: Renewable PTFE seat disc
Bullet6: Class 125 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The PTFE seat ring and stainless steel ball and stem exhibits high chemical resistance properties and is recommended for many high pressure applications. The three-piece valve features threaded ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HG00Z
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Blowout-proof stem
Bullet6: Vented ball
Bullet7: Standard lever handle, optional NIB-SEAL®
Bullet8: Threaded end connections
Bullet9: Dezincification resistant
Country: US
Description: Three-Piece Bronze Ball Valve - Full Port, Stainless Steel Trim
Disclaimer: NIB-SEAL pecent is a registered trademark of NIBCO INC.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze globe valve features a union bonnet with integral seat and renewable PTFE seat disc. It is equipped with solder ends for ease of installation. The globe valve is used for throttling or regulating flow. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® globe valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® globe valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70H8PWP
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 366°F/185°C, 300 psi/20.7 bar non-shock cold working pressure, Integral seat, Union bonnet
Bullet5: Renewable PTFE seat disc
Bullet6: Class 150 solder end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Globe Valve - Bronze, Class 150, Solder Ends
Height: 3.250
Length: 7.250
Made to Order: Yes
MadeInUSA: Yes
Material: Bronze
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The three-piece valve features solder ends for easy installation. Options include NIB-SEAL® insulated handle that eliminates condensate. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8WTU
Width:
Height:
Extra Data: Full port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Blowout-proof stem
Bullet6: Vented ball
Bullet7: Standard lever handle or locking lever, optional NIB-SEAL®
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze gate valve may be used in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HCRKP
Width:
Height:
Extra Data: 150 psi/10.3 bar saturated steam to 353°F, 300 psi/20.7 bar non-shock cold working pressure, Rising stem, Solid wedge
Bullet5: Union bonnet
Bullet6: Class 150 threaded end connections
Bullet7: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet8: Dezincification resistant
Bullet9: Conforms to MSS SP-80
Country: US
Description: Gate Valve - Bronze, Rising Stem, Union Bonnet, Threaded
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
NIBCO® ductile iron butterfly valves provide ease of operation with quarter-turn (90 degrees) open to close. The unique FKM fluoroelastomer molded-in seat liner with stainless steel disc is recommended for chemical applications the liner compatibility will permit. With the internal stem/disc geometric drive design there is no need for pins or bolts that may create leak paths or turbulence in the waterway. An extended neck allows for insulation up to 2 inches. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® butterfly valves are backed by the NIBCO 5-year 125% limited warranty.
Item ID: 70HJXUU
Width:
Height:
Extra Data: FKM fluoroelastomer molded-in seat liner, Lug style, Maximum 300°F service, Valve pressure rating 250 psi
AltImageName1: /NBC/LD30223.jpg
AltImageName2: /NBC/LD30223.jpg
AltImagePath1: /NBC-LD30223.JPEG
AltImagePath2: /NBC-LD30223.JPEG
Bullet10: Not recommended for steam service
Bullet5: Stainless steel disc
Bullet6: Stainless steel stem with stainless steel bushings
Bullet7: Geometric drive
Bullet8: Extended neck
Bullet9: Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. Options include NIB-SEAL® insulated handle that eliminates condensate. The three-piece valve is ideal for hot/cold water, numerous gas applications, compressed air, vacuum service, condenser and chilled water. It may be used for isolation and throttling (half open to full open only). Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO INC. 5-year 125% limited warranty.
Item ID: 70H8VTU
Width:
Height:
Extra Data: Conventional port, Maximum temperature rating 400°F, Stainless steel ball and stem, Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
Bullet10: Use in U.S. drinking water applications is prohibited after January 3, 2014
Bullet5: Blowout-proof stem
Bullet6: Vented ball
Bullet7: Standard lever handle, optional NIB-SEAL®
Bullet8: Solder end connections
Bullet9: Dezincification resistant
Country: US
Description: The NIBCO bronze ball valve provides ease of operation with quarter-turn (90 degrees) open to close, and bubble-tight shutoff at 600 PSI. Options include NIB-SEAL insulated handle that eliminates condensate. The three-piece valve is ideal for hot/cold wate
Height: 3.020
Length: 9.340
MadeInUSA: Yes
Minimum Order Quantity: 1
Prop65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Description
The NIBCO® carbon steel ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE 15% glass seat ring, Graphite stem packing and stainless steel ball/stem exhibits high chemical resistance properties and is recommended for process piping. The valve also features an enclosed bolt design. This valve features a standard lockable lever handle for security purposes. It may be used for isolation and throttling (half open to full open only). Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.
Item ID: 70HFX3T
Width:
Height:
Extra Data: Blowout-proof stem, Conventional port, Maximum temperature rating 400°F, Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
Bullet10: Cast ISO mounting pad
Bullet5: Enclosed bolt design
Bullet6: Reinforced PTFE seats
Bullet7: Stainless steel ball and stem
Bullet8: Vented ball
Bullet9: Locking lever handle
Country: TW
Description: Three-Piece Carbon Steel Ball Valve - Fire Safe, Threaded ISO Mount End
Disclaimer: End Connection: Threaded Valve Style: Three-piece body, conventional port Basic Material: Carbon steel Seat Material: Reinforced PTFE 15% glass Trim Material: Stainless steel ball and stem
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site