Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8050CKF
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
Family: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Extra Data: 250000 Btu/Hr Input Supply Rating, 81 3/4 Inch Tank Height Including Draft Hood, Ashrae, Ansi Z21.10.3, Csa, Gama Applicable Standard, Indoor Type
Item Description
Xtreme is an advanced line of fast recovery commercial gas water heaters. These products can deliver up to 693 gph at 100 deg F rise. The small jacket diameter makes it a popular choice for retro fits and it is a versatile choice for new construction. Models range from 500000-715000 Btu/h, with a maximum temperature setting of 180 deg F.
Item ID: 804XDT7
Width:
Height:
Extra Data: Automatic flue damper low profile design minimizes overall product height, heavy-duty vent hood supports are designed to withstand rigors of installation, Patented multi-flue tank design proprietary steel formulation, patented multi-flue design, and two coats of high temperature porcelain enamel maximize corrosion-resistance and result in a superior heat exchanger design, Space saver design Xtreme maximizes installation adaptability by offering models with front and rear inlet/outlet water connections, short heights and small jacket diameters result in greater installation flexibility, System Sentinel LED diagnostic system our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, patented multi-flue tank design
Family: Xtreme
Bullet10: Altitude certifications standard natural and LP models are certified up to 2000''. High altitude models, 8000''
Bullet11: Anode rods patented design utilizes multiple magnesium rods to ensure long life and corrosion-resistance
Bullet5: Specialized burner assembly each model features 5 premix burners mounted into a metal face plate and sealed with a Viton gasket, patented ''quick release'' manifold for easier service
Bullet6: Direct spark-to-pilot ignition system energy saving ignition that ignites pilot only when there is a call for heat
Bullet7: Round premix burners precision burners are formed from high chromium stainless steel
Bullet8: Low NOx emissions GX90-550 and GX90-640 meet low NOx emissions of less than 40 ng/J full-port, full-flow drain valve
Bullet9: Full-port, full-flow drain valve factory installed brass drain valve allows for faster draining and servicing
Extra Data: Digital LED display communicates system status and heater operation feedback, Low flow activation at 0.3 GPM, Self-diagnostics with intelligent controls actively protect heater in installed environment, Silent operation on all models except for RTEH012240MV
Bullet10: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet11: Save water and time by installing unit at the point-of-use
Bullet12: Control system activates heater only on demand
Bullet13: High temperature limit switch enables safe operation
Bullet14: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Mounts in any orientation for a flexible installation
Bullet6: Compact size fits almost anywhere; suitable for ADA compliant facilities
Bullet7: Only one input line, hot or cold, needed for an easy installation
Bullet8: Designed to deliver hot water to a single pipe faucet or mixing faucets
Bullet9: Integral 3/8'' compression fittings, no soldering or sweat connections required
Item Description
Professional Classic electric water heaters are engineered for longer life - resistored heating elements and premium grade anode rod.
Item ID: 8053AAE
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, Electric junction box located above heating elements for easy installation, EverKleen self-cleaning device fights harmful sediment build-up with a high-velocity spiraling water stream - helps operating efficiency by saving energy, money and improving tank life, Over-temperature protector cuts off power in excess temperature situations
Family: Professional Classic
Bullet5: Enhanced flow brass drain valve
Bullet6: Temperature and pressure relief valve included
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X70C
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Item Description
The PERFORMANCE atmospheric gas water heaters feature a diagnostic gas valve and a 6 years warranty.
Item ID: 8053J4G
Width:
Height:
Extra Data: Eco-friendly burner, low NOx design, Meets 40 ng/J NOx requirements, Recovery: up to 51 gph at a 90 deg F rise, depending on model, Self-powered diagnostic gas control valve for improved monitoring and service
Family: Performance
Bullet10: Temperature and pressure relief valve included
Bullet11: Low lead compliant
Bullet12: Standard replacement parts
Bullet5: Exclusive air/fuel shut-off device
Bullet6: Maintenance free - no filter to clean
Bullet7: Disables the heater in the presence of flammable vapor accumulation
Bullet8: Premium grade anode rod provides long-lasting tank protection
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XEU7
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Extra Data: 310000 Btu/Hr Input Supply Rating, 73 1/2 Inch Tank Height Including Draft Hood, Ashrae, Ansi Z21.10.3, Csa, Gama, Ul Applicable Standard, Compact Type
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C75
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Extra Data: Compact size fits almost anywhere; suitable for ADA compliant facilities, Digital LED display with accessible user interface communicates system status and heater operation feedback, Mounts in any orientation for a flexible installation, Silent operation on all models except for RTEH012240T
Bullet10: Control system activates heater only on demand
Bullet11: High temperature limit switch enables safe operation
Bullet12: Active energy management with power modulation allows for thermostatic accuracy
Bullet5: Only one input line, hot or cold, needed for an easy installation
Bullet6: Designed to deliver hot water to a single pipe faucet, mixing valves or mixing faucets
Bullet7: Integral 3/8'' compression fittings, no soldering or sweat connections required
Bullet8: No T and P relief valve needed (check local codes), ready to go, right out-of-the-box
Bullet9: Save water and time by installing unit at the point-of-use
Extra Data: 2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, ASME construction available, Heavy-duty anode rods, Porcelain enamel lined tank
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 80506LY
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Item Description
The PERFORMANCE high demand gas water heaters offer larger gallon capacities and exceed ANSI standards for flammable vapor ignition-resistance.
Item ID: 8053J44
Width:
Height:
Extra Data: Eco-friendly burner, low NOx design, Exclusive air/fuel shut-off device, Meets 40 ng/J NOx requirements, Recovery capacity: 72.8 gal at a 100 deg F rise
Family: Performance
Bullet10: Low lead compliant
Bullet11: Standard replacement parts
Bullet12: Standard 1'' water connections with side water connections for space heating applications for 75 and 98 gal model
Bullet5: Maintenance free - no filter to clean
Bullet6: Disables the heater in the presence of flammable vapor accumulation
Bullet7: Premium grade anode rod provides long-lasting tank protection
Bullet8: Easy to light - no matches required
Bullet9: Temperature and pressure relief valve included
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XCVQ
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
Professional Classic electric water heaters are engineered for longer life - resistored heating elements and premium grade anode rod.
Item ID: 8056AXE
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, Electric junction box located above heating elements for easy installation, EverKleen self-cleaning device fights harmful sediment build-up with a high-velocity spiraling water stream - helps operating efficiency by saving energy, money and improving tank life, Over-temperature protector cuts off power in excess temperature situations
Family: Professional Classic
Bullet5: Enhanced flow brass drain valve
Bullet6: Temperature and pressure relief valve included
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C7N
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X7XV
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Item Description
Solaraide tanks with multi-port connections are available as electric backup water heaters and as storage tanks for solar water heating systems.
Item ID: 8053J41
Width:
Height:
Extra Data: Collector feed and return fittings conveniently located on front of tank for easy installation, Connection ports on the top, right and left side fit more installations and reduce SKUs, Electric backup model provides at least 40 gal of stored hot water, Two well insulated models to choose from a storage tank or a high-efficiency 4500 W backup electric water heater
Family: Solaraide
Bullet10: Temperature and pressure relief valve included Electric backup model has automatic temperature control and over heat
Bullet5: A special 1/2'' NPT opening is provided for installation of a probe type thermostat
Bullet6: Durable brass drain valve for easy maintenance
Bullet7: Cold water inlet brings cold water to tank bottom to prevent mixing with heated water
Bullet8: Rheemglas tank lining resists corrosion and prolongs tank life
Bullet9: Anode rod equalizes aggressive action for prolonged tank life
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site