Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X8W3
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDU9
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 80507M4
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic electric water heaters are engineered for longer life - resistored heating elements and premium grade anode rod.
Item ID: 8050FGK
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, Electric junction box located above heating elements for easy installation, EverKleen self-cleaning device fights harmful sediment build-up with a high-velocity spiraling water stream - helps operating efficiency by saving energy, money and improving tank life, Over-temperature protector cuts off power in excess temperature situations
Family: Professional Classic
Bullet5: Enhanced flow brass drain valve
Bullet6: Temperature and pressure relief valve included
Item Description
Triton commercial gas water heaters are the most accurate, all-inclusive leak detection and prevention system in the market.
Item ID: 8053D6N
Width:
Height:
Finish: Porcelain Enamel
Extra Data: EcoNet smart monitoring technology with integrated Wi-Fi - Rheem exclusive, provides performance updates and alerts via both mobile device and full-color LCD display, LeakSense - intelligent leak detection system detect leaks as small as a grain of sand and provides real-time notifications that warn you before catastrophic failure occurs, Preventive maintenance alerts - maintenance reminders help to extend life of the tank, Systematic health checks - ongoing self-monitoring of Triton''s most vital components and alerts of potential issues
Family: Triton
Bullet10: Advanced power anodes - self-adjusting, non-sacrificial power anodes provide systematic monitoring of anode health and remaining life
Bullet11: Full modulation - maximizes energy savings by optimizing Btu input for specific water heating demand
Bullet12: Scheduling capability - adjust to heat water only during peak operating hours when your business needs it most
Bullet13: Altitude certified up to 8999'' above sea level
Bullet14: CSA/ASME rated T and P valve
Bullet5: Built-in condensate neutralizer (Standard on both base and premium models) - reduces installation time as plumbers no longer need to install this component
Bullet6: Multiple connection points - multiple water connections at the top, side and bottom of the unit simplify installation for replacement of any model
Bullet7: Variety of flexible venting options including InnoFlue flex venting - polypropylene, PVC, CPVC, InnoFlue flex vent and ABS materials, venting 2'', 3'', 4 ''and 6'' diameters
Bullet8: Patented built-in condensate neutralizer - reduces water acidity for safe drainage
Bullet9: Triple pass heat exchanger - constructed with premium ASME-grade steel to minimize rust and corrosion for extended tank life and maximum thermal efficiency
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
PERFORMANCE electric water heaters feature dual copper heating elements and a 6 years warranty.
Item ID: 80569YE
Width:
Height:
Extra Data: Electric junction box located above heating elements for easy installation, Over-temperature protector cuts off power in excess temperature situations, Premium grade anode rod provides long-lasting tank protection features
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDU5
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X8X3
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
Family: Universal Ultra Low Nox
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Triton commercial gas water heaters are the most accurate, all-inclusive leak detection and prevention system in the market.
Item ID: 8053D65
Width:
Height:
Finish: Porcelain Enamel
Extra Data: EcoNet smart monitoring technology with integrated Wi-Fi - Rheem exclusive, provides performance updates and alerts via both mobile device and full-color LCD display, LeakSense - intelligent leak detection system detect leaks as small as a grain of sand and provides real-time notifications that warn you before catastrophic failure occurs, Preventive maintenance alerts - maintenance reminders help to extend life of the tank, Systematic health checks - ongoing self-monitoring of Triton''s most vital components and alerts of potential issues
Family: Triton
Bullet10: Advanced power anodes - self-adjusting, non-sacrificial power anodes provide systematic monitoring of anode health and remaining life
Bullet11: Full modulation - maximizes energy savings by optimizing Btu input for specific water heating demand
Bullet12: Scheduling capability - adjust to heat water only during peak operating hours when your business needs it most
Bullet13: Altitude certified up to 8999'' above sea level
Bullet14: CSA/ASME rated T and P valve
Bullet5: Built-in condensate neutralizer (Standard on both base and premium models) - reduces installation time as plumbers no longer need to install this component
Bullet6: Multiple connection points - multiple water connections at the top, side and bottom of the unit simplify installation for replacement of any model
Bullet7: Variety of flexible venting options including InnoFlue flex venting - polypropylene, PVC, CPVC, InnoFlue flex vent and ABS materials, venting 2'', 3'', 4 ''and 6'' diameters
Bullet8: Patented built-in condensate neutralizer - reduces water acidity for safe drainage
Bullet9: Triple pass heat exchanger - constructed with premium ASME-grade steel to minimize rust and corrosion for extended tank life and maximum thermal efficiency
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 8050FHA
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804XDTN
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Delivers 90 to 190 deg F water, Installs close to fixtures, eliminating the wait for hot water, Lifeguard heating elements - resist corrosion and burnout, separate screw-in type elements feature a stainless steel outer sheath of Incoloy 840, which surrounds the Nichrome wire filament, Long life ASME tank design - proprietary steel formulation with high temperature porcelain enamel maximizes corrosion-resistance
Bullet5: Immersion thermostat
Bullet6: Water connections - hot outlet and cold inlet are 3/4'' NPT plastic lined nipples which prevent excessive turbulence of heated water and results in optimum tank draw
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 80506PV
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Item Description
Professional Classic tankless electric water heaters offer continuous hot water quick and on demand for multiple applications.
Item ID: 8053C9J
Width:
Height:
Extra Data: 99.8 percent energy efficient, Compact and stylish with digital temperature control in increments of 1 deg F ranging from 80 to 140 deg F, On demand, continuous hot water, Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement