Item Description
Hot water supply heaters are designed for applications that require high inputs and large volumes of stored hot water. Rheem hot water supply heaters are designed to provide hot water service to a variety of commercial applications when used in conjunction with an appropriately sized storage tank. Choose from 82 percent thermal efficiency models that range from 136000-1826000 Btu/h and have maximum temperature setting of 180 deg F. Applications include indoor installation and for use with or without a circulating pump.
Item ID: 804X5Z5
Width:
Height:
Extra Data: Compact design - the low water heater mass design offers substantial savings in weight and cube over most cast iron, steel tube and storage type water heaters making it ideal for rooftop installations and in tight quarters, Energy saving pump control - the energy saving pump control is an electric device that allows the operator to set the desired time for the pump to run after the water heater shuts off, Reliable heat exchanger design - the all copper heat exchanger is a single bank, straight-through design with a floating return header immune to thermal shock, Spark-to-pilot (IID)- this system is standard on all models for minimal heat loss
Bullet5: Glass lined cast iron headers - these headers handle any aggressive water conditions
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Professional Classic electric water heaters are engineered for longer life - resistored heating elements and premium grade anode rod.
Item ID: 80508MV
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, Electric junction box located above heating elements for easy installation, EverKleen self-cleaning device fights harmful sediment build-up with a high-velocity spiraling water stream - helps operating efficiency by saving energy, money and improving tank life, Over-temperature protector cuts off power in excess temperature situations
collection: Professional Classic
Bullet5: Enhanced flow brass drain valve
Bullet6: Temperature and pressure relief valve included
Item Description
PowerPack ASME series commercial electric water heaters deliver a maximum of 190 deg F water and are designed for general use or point-of-use.
Item ID: 804X8X5
Width:
Height:
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C89
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Professional Classic atmospheric gas water heaters are engineered for more hot water at a low operating cost.
Item ID: 8053E6C
Width:
Height:
Extra Data: Exclusive air/fuel shut-off device, Maintenance free - no filter to clean, More hot water at a low operating cost, Recovery: 30.3-40.4 gph at a 90 deg F rise, depending on model
collection: Professional Classic
Bullet10: Easy to light - no matches required
Bullet11: EverKleen patented system fights sediment build-up
Bullet12: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet13: Enhanced flow brass drain valve
Bullet14: Factory installed temperature and pressure relief valve on select models
Bullet15: Low lead compliant
Bullet16: Standard replacement parts
Bullet5: Protective control system that disables the heater in the presence of flammable vapor accumulation
Bullet6: Eco-friendly burner, low NOx design
Bullet7: Meets 40 ng/J NOx requirements
Bullet8: Premium grade anode rod provides long-lasting tank protection
Bullet9: All models certified up to 5999'' above sea level, some certified up to 10000''
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Item Description
Professional Classic Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 80508MC
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
collection: Professional Classic
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053F6L
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X8WM
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Item Description
Introducing Rheem commercial condensing tankless water heaters - the most popular brand of tankless water heaters and the best option for commercial projects and applications. This ever-expanding commercial tankless line now includes 8 new units with 4 built-in manifold control ready options and common venting availability on all indoor models.
Item ID: 8053G6N
Width:
Height:
Finish: Gray Powder Coated
Extra Data: Exclusive hot-start programming, Hard water buildup warning, Overheat detection override, Service notification setting
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C8T
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing
Extra Data: Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence, The short heights and narrow jacket diameters, plus the top, front and rear water inlets/outlets offer the ultimate in installation flexibility, The tighter the commercial retrofit, the more you will appreciate how the universal''s compact size and multiple water connections simplify installations, choose from 80 percent thermal efficiency models that range from 98000-399900 Btu/hr and have, Universal''s proprietary steel formulation, patented multi-flue design, combined with two coats of porcelain enamel, results in a superior heat exchanger design
collection: Universal
Bullet10: Anode design utilizes multiple magnesium rods to ensure corrosion-resistance for a long tank life
Bullet5: Precision burners, raised port design, are formed from high chromium stainless steel, each burner assembly slides out like a drawer for quick inspection and maintenance
Bullet6: Low profile damper minimizes overall product height, heavy-duty vent hood supports are designed to withstand the rigors of installation
Bullet7: Factory installed brass drain valve allows for faster draining and servicing
Bullet8: Energy saving ignition that ignites pilot only when there is a call for heat
Bullet9: Up to 5000'' for natural gas and 2000'' for LP with high altitude certification kit, up to 8000''
Extra Data: 50, 85, 120 and 175 gal models available, Ideal for general commercial use and point-of-use applications like eyewash stations, or used as a booster, Inputs: 3 through 108 kW, Voltages: 208, 240, or 480 VAC in either 1 ph or 3 ph, 277 VAC 1 ph
Bullet10: Two anode rods are installed to ensure long life and corrosion-resistance
Bullet5: Element wattages: 2000, 3000, 4000,4500, 5000 and 6000 in the 4 voltages, 9000 W element at 480 VAC
Bullet6: Available in 1, 3, 6, 9 or 12 element configurations for your specific kW application
Bullet7: Elements are Lifeguard stainless steel, screw-in type that resist burnout and corrosion
Bullet8: ASME construction is available on E50, E85 and E120 models and comes standard on E175 model
Bullet9: Long life tank design: proprietary steel formulation with high temperature glass lining to maximize corrosion-resistance resulting in a superior tank design
Item Description
Professional Classic Point-of-Use electric water heaters feature a space-saving design for installation in limited spaces.
Item ID: 80508LV
Width:
Height:
Extra Data: Automatic thermostat keeps water at desired temperature, High-efficiency heating element, Over-temperature protector cuts off power in excess temperature situations, Wall bracket for easy wall mount installations and corrosion-resistant 1/4 turn drain valve included with 2.5 gal model
collection: Professional Classic
Bullet5: Temperature and pressure relief valve
Bullet6: Exclusive Rheemglas tank lining resists corrosion and prolongs tank life
Bullet7: Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Bullet8: These units are UL listed and comply with Underwriter''s Laboratories Specifications 174
Item Description
Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers. Our 10 gal electric booster will raise preheated or cold water to 180 deg F rinse temperature for compliance with UL sanitation (NSF5) and all federal, state, county and local health department sanitation codes. In addition, these models can be used as circulating tank commercial electric water heaters for gravity or pump circulation to an auxiliary storage tank.
Item ID: 804X8W2
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Integral fusing - all models have integral fusing for each element, Long life heating elements - separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion, for long element life and a long life performance, elements are directly, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance resulting in a superior tank design, System sentinel - all electric booster models employ an element diagnostic panel, utilizing light emitting diodes (LED), corresponding to the number and location of each heating element. LED''s are energized when the electric elements are operating
Bullet10: All units are furnished with a fused 120 V control circuit, all controls (thermostats, high temperature limit, etc.) are operated off of this basic 120 V control circuit, this circuit is created by an internal multi-tap transformer of unique design that ha
Bullet5: Anode rods - (2) magnesium anodes are installed in each tank for maximum corrosion-resistance
Bullet6: AGA/ASME rated T and P valve - factory installed relief valve
Bullet7: Electrical connections - pre-wired, accessible control box with multiple knock-outs on side in size selections to match the National Electric Code, sizes range from 1/2''-2'', a grounding screw is provided for attaching an equipment groundi
Bullet8: Single panel control box - it comes with hinged stainless steel door that provides immediate access to all electrical components and elements
Bullet9: Terminal block - all models are equipped with UL listed terminal blocks for simplicity of installation, the terminal block will accept either copper or aluminum field connect wire
Item Description
Introducing Rheem commercial condensing tankless water heaters - the most popular brand of tankless water heaters and the best option for commercial projects and applications. This ever-expanding commercial tankless line now includes 8 new units with 4 built-in manifold control ready options and common venting availability on all indoor models.
Item ID: 8053G65
Width:
Height:
Finish: Gray Powder Coated
Extra Data: Exclusive hot-start programming, Hard water buildup warning, Overheat detection override, Service notification setting
Item Description
Light-duty commercial electric line designed specifically for any application needing moderate amounts of hot water.
Item ID: 8053C99
Width:
Height:
Finish: Porcelain Enamel
Extra Data: Efficient design - 2-1/2'' of rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs, Long life heating elements - our patented resistor elements are designed with a specially treated, double layer of magnesium oxide and copper to resist corrosion, replacement elements screw-in easily, Long life tank design: proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion-resistance of the tank, this prolongs the effective life of the anode rod and in turn, the life of the tank, Wiring options - simultaneous and non-simultaneous wiring, 1 ph and 3 ph are available
Bullet5: Automatic temperature control - a surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level
Bullet6: Durable brass drain valve - factory installed brass drain valve allows for faster draining and servicing